购物车图片 View Cart ( )
工人工作升降台
包裹卸货机
  • 发布时间: 2019 - 06 - 20
    Encloses sides and ends of both scissor legs and the full width of the back side of the platform. Black and yellow 3' vinyl pleats.
  • 发布时间: 2019 - 06 - 20
    Encloses sides and ends of both scissor legs and the full width of the back side of the platform. Black and yellow 3' vinyl pleats.
  • 发布时间: 2019 - 06 - 20
    30' long ramp with diamond plate.
  • 发布时间: 2019 - 06 - 20
    Encloses sides and ends of both scissor legs and the full width of the back side of the platform. Black and yellow 3' vinyl pleats.
  • 发布时间: 2019 - 06 - 20
    A mini-dolly that consists of a steel dolly with two swivel and two rigid side mounted hard rubber casters, and a foot operated floor lock
MMC-ST系列,让飞行变得更简单。
登录
PalletPal 360 弹簧升降台
< >

PalletPal 360™弹簧升降台是原始的自动调平弹簧升降台,可以更快,更安全,更轻松地装卸托盘。这种简单的弹簧升降台采用弹簧和减震器系统,可以随着托盘上货物的添加降低台面高度和货物的移除去提升台面的高度。转盘顶部允许近侧装载和卸载。无需电源或空气供应。这种弹簧升降台可轻松处理高达2吨的载荷。

许多设备升降台可在标准发货期内发货。致电 +86 021-57491919或 发送邮件到 southworth@southworth.com.cn

● 自动调平操作无需操作员调整

● 坚固的管材机架,可承受高达2吨的负载。

● 重型弹簧经过校准,可将托盘带到最方便的高度。

● 经验证的连杆机构的设计可在不均匀负载下保持水平。

● 减震器提供稳定的逐渐升高和降低过程,无过冲或弹跳。

● 用于支撑转盘旋转的轴承具有很小的摩擦阻力并可以用于近侧装卸

● 酚醛树脂盖板(可选)。

● 用于叉车重新定位的叉槽也可延伸底座,以实现稳定的自由放置。

● 调平脚(可选)允许在倾斜或不平的地板上使用。

● 独立式,可以通过叉车轻松重新定位。


网上订购
购物车中的商品
有疑问或评论?
  • 申请人姓名:
  • E-mail:
  • *
  • 公司 (*)
  • 地址 (*)
  • 城市 (*)
  • 区域 (*)
  • 电话
  • *
  • 详细说明:
  • *
后挡板液压升降台规格
型号载荷范围最高高度最低高度底座尺寸转盘直径毛重
PalletPal 360181 - 2041Kg711mm241.3mm914mm x 914mm
1108.075mm186Kg
NOTE: Due to the current state of the steel market, budget pricing shown does not include increased costs due to steel surcharges.


选项和配件
  • PHENOLIC COVER
  • SOLID DISC COVER
  • FORK POCKET CASTER KIT
  • LEVELING FEET
  • BELLOWS ACCORDIAN SKIRTING
  • ACCESS STEP
  • SQUARE TURNTABLE PLATFORMS
  • SPECIAL FINISHES / MATERIALS
  • PHENOLIC COVER
    PHENOLIC COVER

    Sits above the palletizer, but under the turntable ring. Keeps debris from collecting under the unit

  • SOLID DISC COVER
    SOLID DISC COVER

    Solid steel disc cover in place of open turntable ring. Ideal for damaged pallets or small / odd sized pallets or skids.

  • FORK POCKET CASTER KIT
    FORK POCKET CASTER KIT

    Mounts under unit in fork pockets to allow palletizer to be portable. A foot operated floor lock keeps the unit from rolling when in use.

  • LEVELING FEET
    LEVELING FEET

    For use on uneven or damaged floors. 4 adjustable screw feet can be independently adjusted to ensure the palletizer is perfectly level.

  • BELLOWS ACCORDIAN SKIRTING
    BELLOWS ACCORDIAN SKIRTING

    Black and yellow vinyl skirting wraps entire unit to keep underneath free from debris. Pleats expand and contract as unit raise and lowers.

  • ACCESS STEP
    ACCESS STEP

    Handy step slips into fork channels to give shorter workers better access to the top of loads. Non-skid surface.

  • SQUARE TURNTABLE PLATFORMS
    SQUARE TURNTABLE PLATFORMS

    Units can be equipped with a square turntable instead of the standard ring. Use with small or odd shaped skids or pallets.

  • SPECIAL FINISHES / MATERIALS
    SPECIAL FINISHES / MATERIALS

    PalletPal 360 is available with a variety of custom finishes including special paint colors, chemical resistant coatings, two-part epoxies, hot-dipped galvanizing. Stainless steel construction is also available.


  • 产品手册
    展会
    生产力审计
    索斯沃斯专家提出的生产力和安全建议
    索斯沃斯(上海)升降设备有限公司
    地址: 上海市闵行区秀文路908弄1号楼8楼802 诺德国际广场A栋
    邮箱: southworth@southworth.com.cn
    传真:+86 021-57494281
    电话:+86 021-57491919

    索斯沃斯(上海)升降设备有限公司
    电话: +86 021 57491919 | 传真: +86 021 57494281 | 网站地图 | 沪ICP备07027643号-1